Distributed Common Parameters Configuration¶

In the matrixone/etc/launch-with-proxy/ directory, there are four configuration files: cn.toml, tn.toml, proxy.toml, and log.toml. The parameters contained in these configuration files are explained below:

cn.toml¶

Default Parameters¶

The cn.toml file contains the following default parameters:

Parameter	Explanation	Example
[log]	Log configuration section
level	Log level, default is info, can be modified to different levels	level = “info”
[cn]	cn node, not editable	/
port-base	Starting port number used by “cn”. Find an available port for internal services by incrementing from this base port number, continuously checking the next 20 ports	port-base = 18000
service-host	Service connection address used for registration with HAKeeper	service-host = “127.0.0.1”
[cn.frontend]	Frontend configuration section
port	Port for MatrixOne to listen on and for client connections	port = 6001
host	Listening IP address	host = “0.0.0.0”
[fileservice.s3]	S3	File service configuration section
bucket	S3 bucket name	bucket = “my-bucket”
key-prefix	S3 key prefix	key-prefix = “prefix/”

Extended Parameters¶

In the cn.toml file, you can also customize and add the following configuration parameters:

Parameter	Explanation	Example
[log]	Log configuration section
format	Log save format as JSON or other	format = “console”
filename	Log filename	filename = “log1.log”
[cn.frontend]	Frontend configuration section
unix-socket	Listen on Unix domain socket	unix-socket = “/tmp/mysql.sock”
lengthOfQueryPrinted	Console output query length	lengthOfQueryPrinted = 200000
enableTls	Enable TLS	enableTls = false
tlsCaFile	Client SSL CA list file path	tlsCaFile = ‘’
tlsCertFile	Client X509 PEM format key file path	tlsCertFile = ‘’
tlsKeyFile	Client X509 PEM format key file path	tlsKeyFile = ‘’
saveQueryResult	Save query results	saveQueryResult = false
queryResultTimeout	Query result timeout	queryResultTimeout = 24
queryResultMaxsize	Maximum query result size	queryResultMaxsize = 100
lowerCaseTableNames	Case sensitivity of identifiers. The default value is 1, which means case-insensitive	lowerCaseTableNames = 1
[cn.Txn]	Transaction configuration section
isolation	Transaction isolation level. This parameter configures the isolation level on the node (cn). The isolation level defines how transactions behave when dealing with concurrent operations. By default, if the isolation level (Isolation) is not set and the transaction mode (Mode) is set to optimistic, the isolation level will be set to Serializable Isolation (SI). When the transaction mode is pessimistic, the isolation level will be set to Read Committed Isolation (RC). Default: RC	isolation = “RC”
mode	Transaction mode. This parameter configures the transaction mode on the node (cn). The transaction mode defines how operations and concurrency are handled in transactions. Valid values are optimistic and pessimistic, with the default being pessimistic.	mode = “pessimistic”
[fileservice.s3]
endpoint	S3 endpoint address	endpoint = “s3.amazonaws.com”
[fileservice.cache]	File service cache configuration section
memory-capacity	Cache memory size	memory-capacity = “512MB”
disk-path	Disk cache path	disk-path = “/var/matrixone/cache”
disk-capacity	Disk cache capacity	disk-capacity = “8GB”
[observability]	Observability parameters
host	Exposed metrics service listening IP. This parameter specifies the IP address that the metrics service listens on.	host = “0.0.0.0”
statusPort	Prometheus monitoring port. This parameter defines the port number that the metrics service listens on. Metrics services typically provide metric data via HTTP. This parameter and the host parameter form the access address for the metrics service.	statusPort = 7001
enableMetricToProm	Enable metric service. If set to true, metric service will be enabled	enableMetricToProm = false
disableMetric	Disable metric collection. If set to true, the system will not collect any metric data, and the metric service port will not be listened to	disableMetric = false
disableTrace	Disable trace collection. If set to true, the system will stop collecting any trace, metric, and log data	disableTrace = false
longQueryTime	Log queries that exceed execution time. This parameter defines a threshold in seconds to filter out queries that exceed this threshold in execution time. The execution plans (ExecPlan) of these queries are then logged for later analysis. If set to 0.0, all execution plans of queries will be logged.	longQueryTime = 1.0

tn.toml¶

Default Parameters¶

The tn.toml file contains the following default parameters:

Parameter	Explanation	Example
[log]	Log configuration section
level	Log level, default is info, can be modified to different levels	level = “info”
[dn]	TN node, not editable
uuid	Unique identifier of TN, not editable	uuid = “dd4dccb4-4d3c-41f8-b482-5251dc7a41bf”
port-base	Starting port number used by “TN”. Find an available port for internal services by incrementing from this base port number, continuously checking the next 20 ports	port-base = 19000
service-host	Service connection address used for registration with HAKeeper	service-host = “0.0.0.0”
[fileservice.s3]	S3	File service configuration section
bucket	S3 bucket name	bucket = “my-bucket”
key-prefix	S3 key prefix	key-prefix = “prefix/”

Extended Parameters¶

In the tn.toml file, you can also customize and add the following configuration parameters:

| Parameter |

log.toml¶

Default Parameters¶

The log.toml file contains the following default parameters:

Parameter	Explanation	Example
[log]	Log configuration section
level	Log level, default is info, can be modified to different levels	level = “info”
[logservice]	Logservice configuration section
uuid	Unique identifier of Logservice, not editable	uuid = “dd1dccb4-4d3c-41f8-b482-5251dc7a41bf”
data-dir	Default data directory	data-dir = “./mo-data/logservice”
[fileservice.s3]	S3	File service configuration section
bucket	S3 bucket name	bucket = “my-bucket”
key-prefix	S3 key prefix	key-prefix = “prefix/”

Extended Parameters¶

In the log.toml file, you can also customize and add the following configuration parameters:

Parameter	Explanation	Example
[log]	Log configuration section
format	Log save format as JSON or other	format = “console”
filename	Log filename	filename = “log1.log”
[logservice.BootstrapConfig]
num-of-log-shards		num-of-log-shards = 0
num-of-tn-shards		num-of-tn-shards = 0
num-of-log-shard-replicas		num-of-log-shard-replicas = 0
[fileservice.s3]
endpoint	S3 endpoint address	endpoint = “s3.amazonaws.com”
[fileservice.cache]	File service cache configuration section
memory-capacity	Cache memory size	memory-capacity = “512MB”
disk-path	Disk cache path	disk-path = “/var/matrixone/cache”
disk-capacity	Disk cache capacity	disk-capacity = “8GB”
[observability]	Observability parameters
host	Exposed metrics service listening IP. This parameter specifies the IP address that the metrics service listens on.	host = “0.0.0.0”
statusPort	Prometheus monitoring port. This parameter defines the port number that the metrics service listens on. Metrics services typically provide metric data via HTTP. This parameter and the host parameter form the access address for the metrics service.	statusPort = 7001
enableMetricToProm	Enable metric service. If set to true, metric service will be enabled	enableMetricToProm = false
disableMetric	Disable metric collection. If set to true, the system will not collect any metric data, and the metric service port will not be listened to	disableMetric = false
disableTrace	Disable trace collection. If set to true, the system will stop collecting any trace, metric, and log data	disableTrace = false
longQueryTime	Log queries that exceed execution time. This parameter defines a threshold in seconds to filter out queries that exceed this threshold in execution time. The execution plans (ExecPlan) of these queries are then logged for later analysis. If set to 0.0, all execution plans of queries will be logged.	longQueryTime = 1.0

proxy.toml¶

Default Parameters¶

The proxy.toml file contains the following default parameters:

Parameter	Explanation	Example
[log]	Log configuration section
level	Log level, default is info, can be modified to different levels	level = “info”
[proxy]	Proxy configuration section
listen-address	Listen address, default is `0.0.0.0:6009`	listen-address = “0.0.0.0:6009”
[fileservice.s3]	S3	File service configuration section
bucket	S3 bucket name	bucket = “my-bucket”
key-prefix	S3 key prefix	key-prefix = “prefix/”

Extended Parameters¶

In the proxy.toml file, you can also customize and add the following configuration parameters:

Parameter	Explanation	Example
[log]	Log configuration section
format	Log save format as JSON or other	format = “console”
filename	Log filename	filename = “log1.log

“ | | [proxy] | Proxy configuration section | | | rebalance-interval | Rebalance interval. This is the time interval between two rebalance operations. In distributed systems, rebalance operations are performed to balance the load between servers, ensuring each server has a similar workload. | rebalance-interval = 30 | | rebalance-disabled | Rebalance disabled flag. If set to true, the rebalance is disabled, and the system won’t perform rebalance operations automatically. | rebalance-disabled = false| | rebalance-tolerance| Rebalance tolerance. This parameter indicates the tolerance level of the rebalance. When the number of connections exceeds the average value avg * (1 + tolerance), the connections will be migrated to other CN (Compute Node) servers. The tolerance value should be less than 1, defining to what extent the number of connections can exceed the average without triggering a rebalance operation. For example, if tolerance is set to 0.3 when the number of connections on a server exceeds 30% of the average connection count, rebalance operations will migrate connections to other servers to balance the load. | rebalance-tolerance = 0.3 | | [fileservice.s3] | | | | endpoint | S3 endpoint address | endpoint = “s3.amazonaws.com”| | [fileservice.cache]| File service cache configuration section | | | memory-capacity | Cache memory size | memory-capacity = “512MB” | | disk-path | Disk cache path | disk-path = “/var/matrixone/cache”| | disk-capacity | Disk cache capacity | disk-capacity = “8GB”| | [observability] | Observability parameters | | | host | Exposed metrics service listening IP. This parameter specifies the IP address that the metrics service listens on. | host = “0.0.0.0” | | statusPort | Prometheus monitoring port. This parameter defines the port number that the metrics service listens on. Metrics services typically provide metric data via HTTP. This parameter and the host parameter form the access address for the metrics service. | statusPort = 7001 | | enableMetricToProm | Enable metric service. If set to true, metric service will be enabled | enableMetricToProm = false| | disableMetric | Disable metric collection. If set to true, the system will not collect any metric data, and the metric service port will not be listened to | disableMetric = false | | disableTrace | Disable trace collection. If set to true, the system will stop collecting any trace, metric, and log data | disableTrace = false | | longQueryTime | Log queries that exceed execution time. This parameter defines a threshold in seconds to filter out queries that exceed this threshold in execution time. The execution plans (ExecPlan) of these queries are then logged for later analysis. If set to 0.0, all execution plans of queries will be logged. | longQueryTime = 1.0 |